• Distributes and switches 4K UHD AV signals via standard gigabit Ethernet networks,providing complete end-to-end streaming systems.
• Encodersupports HDMIinput and outputresolutions up to 3840 x 2160@60Hz4:2:0.
• Decoder supportsHDMI output resolutions up to 3840 x 2160@30Hz 4:4:4.
• Supports streaming resolutions up to 3840 x 2160@30Hz 4:4:4.
• Features video wall up to the dimensions of 16 x 16.
• Supports HDR10.
• Supports IP stream transmission through either the 1G Fiber port or 1G BASE-T port.
• Supports CEC one-touch-play and standby commands to power on/off the display, as well as CEC Frame.
• Supports multi-channel audio up to PCM 7.1, Dolby Atmos and DTS:X.
• Supportsindependent analog audio input and output at 2channels, 24bits@48kHz/channel.
• HDCP 2.2 compliant.
• Flexible routing policies, allowing audio, video, USB, IR and RS232 signals to be routed separately or as a whole throughout the matrix system.
• Allows AV, USB, IR, RS232 and power signals to be delivered up to 330ft/100mover a single Cat 5e cable or above.
• Allows video output to follow input resolution or to convert the input resolution to 3840 x 2160@30Hz 4:4:4 and 1080p@60Hz.
• Supports HDMI input and output transmission distance up to 50ft/15m.
• 1 ~ 2 fps latency.
• Supportsbi-directionalserial communication, allowing control of remote RS232 devices between encoders/decoders and IP control box, or between encoders and decoders.
• Supportsbi-directional IR pass-through, allowing control of remote source and display devices between encoders and decoders.
• Supports IR generation – send IR codes through API. 
• Encoder offers a USB type B port to directly connect to a PC and complies with USB 2.0 standard.
• Decoder offers two USB type A ports to directly connect to a keyboard and a mouse and complies with USB 2.0 standard, providing +5 VDC at up to 500 mA to connected USB peripherals.
• Supports Mouse Roaming. (See Configuring Mouse Roaming section for more information)
• Supportspoint-to-point, point-to-multipoint, multipoint-to-point, multipoint-to-multipointapplications.
• Supports PoE to be remotely powered by compatible power source equipment such as a PoE-enabled Ethernet switch, eliminating the need for a nearby power outlet.
• Supports user-selectable output HDCP configuration via PC configurator.
• Fit in/stretch out video wall, and rotate video management -- Decoded video can fill a video wall, maintain aspect ratio in a video wall, or can be rotated 180°and 270°clockwise, presenting imagery that meets customer expectations.
• Supports Auto IP, zero-configuration networking (zeroconf), a set of special technologies that automatically assign dynamic IP addresses tothe deviceson startup and a server-less method of choosing an IP address.
• Workswith multipleoperation tools, the front panel link DIP switch, WindowsPCconfigurator, PF-IP Touch on iPad and IP control box for device control and management.
• Supports communications protocols used on the Ethernet such as TCP/IP, ARP, DHCP, ICMP (ping), IGMP, UDP.

Technical
Input Video Port	1 x female HDMI type A (19 pins)
Input Video Type	HDMI, HDCP 2.2
Input Resolution	3840 x 2160p@24Hz 4:4:4, 3840 x 2160p@30Hz 4:4:4, 3840 x 2160p@50Hz 4:2:0, 3840 x 2160p@60Hz 4:2:0, 640 x 480p@60Hz, 720 x 480p@60Hz 1280 x 720p@60Hz, 1920 x 1080i@60Hz, 1920 x 1080p@60Hz, 720 x 576p@50Hz 1280 x 720p@50Hz, 1920 x 1080i@50Hz 1920 x 1080p@50Hz, 1920 x 1080p@24Hz 1920 x 1080p@25Hz,640 x 480@60Hz, 800 x 600@60Hz   1024 x 768@60Hz, 1280 x 720@60Hz 1280 x 768@60Hz, 1280 x 800@60Hz 1280 x 960@60Hz, 1280 x 1024@60Hz 1360 x 768@60Hz, 1366 x 768@60Hz 1400 x 1050@60Hz, 1440 x 900@60Hz 1600 x 900@60Hz, 1600 x 1200@60Hz 1680 x 1050@60Hz, 1920 x 1080@60Hz 1920 x 1200@60Hz
Input Video Signal	0.5~1.2 V p-p
Input DDC Signal	5 V p-p (TTL)
Average Encoding Data Rate	3840 x 2160@30Hz: about 250 Mbps 1080p@60Hz: about 150 Mbps
Output Video Port	HDMI loop-through (local output): 1 x female HDMI type A (19 pins) Ethernet output:1 x 1G Base-T port, 1 x 1G SFP port
Output Video Type	HDMI loop-through (local output): HDMI, HDCP 2.2 Ethernet output: IP stream
Output Resolution	HDMI loop-through (local output): Up to 3840 x 2160@60Hz 4:2:0 Ethernet output: Up to 3840 x 2160@30Hz 4:4:4
Video Impendence	100 Ω
End-to-End Time Latency	1 ~ 2 fps
Maximum Pixel Clock	297 MHz
Max Video Data Rate	8.91 Gbps (2.97 Gbps per color)
Input Audio Port	HDMI: 1 x female HDMI type A Audio In: 1 x 3.5 mm stereo jack
Input Audio Format	HDMI: LPCM 2.0/2.1/5.1/ 7.1; Dolby 5.1/7.1/Atmos; DTS 5.1/7.1/DTS:X Audio In: stereo
Output Audio Port	HDMI (local output): 1 x female HDMI type A (19 pins) Ethernet output: 1 x 1G Base-T port, 1 x 1G SFP port Audio Out: 1 x 3.5 mm stereo jack
Output Audio Format	HDMI: LPCM 2.0/2.1/5.1/ 7.1; Dolby 5.1/7.1/Atmos; DTS 5.1/7.1/DTS:X Ethernet: Dolby 5.1/Dolby True HD/Dolby Digital Plus, DTS 5.1/DTS HD/DTS True HD, LPCM 2.0/2.1/5.1/ 7.1 Audio Out: Stereo
Control Method	Front panel link DIP switch, Windows PC configurator (PF-IP Console), IP control box, PF-IP Touch on iPad

Decoder

• Download UM_NEX-E500F & NEX-D500F V1.0.2.pdf
• Download Diagram_Encoder_NEX-E500F.pdf